The TRX900LT series includes the TRX900LT, TRX900LTS, TRX900LTH & TRX900LTHS transmitters.
They combine crystal clear digital wireless transmission, a built-in backup recorder and remote control functionality via the IFB100 and/or ZaxNet into a single, low-cost system for episodic television production, motion picture and broadcast events.
Designed to be lightweight and durable, the LT Series transmitters are housed in a high strength, impact resistant nylon polymer casing that provides protection from both corrosion and water damage.
Like all Zaxcom digital wireless, the TRX900LT series features 100% digital transmission for audio quality that rivals a hard-wired system and is fully encrypted to eliminate the possibility of production audio interception and theft. They come standard with our patented internal timecode referenced back-up recorder which backs up the transmitted audio onto a removable microSD card eliminating the possibility of audio loss due to interference or signal dropout. The transmitters operate on a single AA lithium battery (run times vary by model, please see specifications) and are fully compatible with all Zaxcom wireless receivers and IFB transmitters.
The LT series is fully compatible with ZaxNet, Zaxcom’s 2.4-GHz RF network that enables the distribution of remote control signals, timecode, IFB audio, and metadata. With ZaxNet, one can remotely control gain settings and replay audio via a timecode reference giving production sound mixers the ability to replay and remix audio, creating a virtual multi-track playback and re-record system.
Audio can be recorded, played back and timecode referenced either manually or through remote control commands from the IFB100 transmitter.
The audio is automatically recorded full bandwidth as a .ZAX file. The included ZaxConvert file transfer software (available for both MAC and PC) utilizes sample rate conversion to obtain the sample rate and bit depth of choice when files are imported to your computer. There are two timecode stamped file types to choose from: BWF (Broadcast Wave Format) or MP3 (MPEG-1 Audio Layer 3). MP3 files are great for quickly transferring files over the internet to a transcription house. Any number of versions of the same recording can be made from a single file.
TRX900LT / LTS RF Power Output: 50 mW
TRX900LTH / LTHS Power Output: 25 / 50 / 125 mW – Software Selectable
RF Modulation: Proprietary Digital Method
RF Frequency Range: 518.0 to 872.0 MHz (Typical Blocks are 36 MHz wide)
RF Frequency Step: 100 KHz
RF Bandwidth: 200 KHz
Channel Separation: 500 KHz (700 KHz recommended)
Antenna Connector: 50 Ω SSMA Female
Emission Designator: 180 KV2E
FCC Part: 75.861
Dynamic Range: 106 dB
Frequency Response: Mode 0: 20 Hz to 16 kHz / T & M Mode 0.2 Hz to 16 kHz
High Pass Filter: Off or 30 to 220 Hz, Steps: 10 (6 dB Per Octave)
System Group Delay: 3.5 ms
Mic Power: 3.3 VDC
Mic Connector: 3-Pin Micro LEMO
Input Range: -60 to -30 dBu
Mic Impedance: 4.7 k Ω
ADC Bit-Depth: 24 Bits
ADC Sampling-Rate: 48 kHz
Timecode Reader / Generator
Clock Accuracy: 1.54 PPM (1 Frame Out in 6 Hours)
Timecode Type: SMPTE
Timecode Frame-Rates: 23.98, 24, 25, 29.97NDF, 29.97DF, 30NDF, 30DF
Media: MicroSD Card (Flash Memory)
File Format: .ZAX
Recording Time: 96 Hours (16 GB Card)
2.4 GHz ZaxNet Receiver
RF Frequency Range: 2.403 to 2.475 GHz
RF Modulation: Digital Spread Spectrum
RF Frequency Step: 0.001 GHz (1 MHz)
RF Bandwidth: 1 MHz
Channel Separation: 2 MHz
Sensitivity: -96 dBm
Weight: 3.1 oz with Battery
Dimensions (H x W x D): 2.4″ x 2.4″ x .65″
Display: Graphic LCD
TRX900LT / LTS Battery Life: Up to 5 Hours with a Lithium AA
TRX900LTH / LTHS Battery Life: Up to 3.5 Hours with a Lithium AA
TRX900LTH / LTHS Battery Life with PowerRoll: Up to 4.5 Hours with a Lithium AA
Please note you cannot use alkaline batteries with these transmitters, only Lithium Ion or rechargeable NiMH AA’s.